In daily life and work, it is inevitable to encounter many maintenance tasks. So, what maintenance tools should be prepared? Today, Hardwaretools.comc will recommend some practical small tools for maintenance.
Pliers
Pliers are hand tools used to clamp or break things. The shape of pliers is generally V-shaped, usually consisting of three parts: handle, jaw, and mouth.
Pliers can be divided into wire pliers, pointed nose pliers, wire stripping pliers, pipe pliers, etc. according to their functions. Classification of pliers
- Wire pliers
Wire pliers are a type of clamping and cutting tool. - Sharp nose pliers
Sharp nose pliers, also known as trimming pliers, are mainly used to cut relatively thin metal wires and are one of the commonly used tools for electricians. - Wire stripping pliers
Wire stripping pliers are tools used to remove the insulation layer outside metal wires. - Pipe pliers
Used to tighten or loosen screws on various pipes, gently tapping with a rubber hammer will not damage the painted surface. Rubber hammers are mainly used to repair small surface depressions without damaging the surface gloss. It has a hard surface (steel) on one end and a soft surface on the other end, with replaceable rubber heads, suitable for repairing chrome steel parts or other precision components.
hammer
A hammer is a tool that strikes an object to move or deform it. The most commonly used method is to drive nails, correct or break open objects. Hammers come in various forms, with the most common being a handle and a top. The top side is flat for tapping, while the other side is a hammer head. The shape of the hammer head can be like a sheep horn or wedge-shaped, and its function is to pull out a nail. In addition, it also has a round headed hammer head. - Sheep horn hammer
A sheep horn hammer is a type of hammer. Generally, one end of the sheep horn hammer is round, and the other end is flat and bent downwards with a V opening, for the purpose of lifting nails. The sheep horn hammer existed in ancient Rome, but the modern style of the sheep horn hammer was designed by Americans. - Round headed hammer
Round heads are used on non flat objects. For example, there is a small hole on a wooden board, and you need to nail a nail in this hole. A flat head may not fit in, but a round head may be more suitable.
A wrench is a commonly used installation and disassembly tool. A manual tool that uses the principle of leverage to rotate bolts, screws, nuts, and other threaded fasteners that hold the opening or socket of bolts or nuts. A wrench is usually equipped with a clamp on one or both ends of the handle to apply external force. By applying external force to the handle, it can turn a bolt or nut and hold the opening or sleeve of the bolt or nut. When in use, apply external force to the handle in the direction of thread rotation to turn the bolt or nut. Wrenches are usually made of carbon structural steel or alloy structural steel. - Dual purpose wrench
Dual purpose wrench: One end is the same as a single headed wrench, the other end is the same as a ring wrench, and both ends are used to turn bolts or nuts of the same specifications. - Active wrench
Active wrench: The opening width can be adjusted within a certain size range, and can rotate bolts or nuts of different specifications. The structural feature of this wrench is that the fixed jaws are made into flat jaws with fine teeth; One end of the movable jaw is made into a flat jaw; The other end is made into a concave jaw with fine teeth; Press the worm downwards to quickly remove the movable jaws and switch their positions.
screwdriver
A screwdriver is a tool used to turn screws into place, usually with a thin wedge-shaped head that can be inserted into the slot or recess of the screw head.
Keep these small tools at home and in the office to ensure worry free life and work.
