Related knowledge about hardware accessories

Hardware accessories
There are many types of furniture hardware, including drawer guides, clothing accessories, cabinet legs, furniture legs, shelf pins, connectors, shoe racks, wire hole covers, clothes hooks, foot mats, child protective equipment, etc; Door related hardware includes locks, guide rails, hinges, handles, floor springs, door closers, bathroom glass clips, hinges, door hooks, peepholes, door stops, magnetic door hooks, collision beads, reverse plate supports, door numbers, etc; Fasteners include round nails, floor nails, decorative nails, cement nails, shoe nails, felt nails, self tapping nails, wood screws, special nails, drywall nails, expansion nails, advertising nails, mirror nails, rubber plugs, and standard parts; Storage categories include toolkits, toolboxes, and combination shelves; Wheel types include rubber wheels, nylon wheels, metal wheels, polyurethane wheels, etc; Rope chains include polypropylene ropes, polyester ropes, acrylic ropes, nylon ropes, pet chains, decorative chains, iron ring chains, loops, safety shackles, blue screws, S-hooks, etc; The movers have hydraulic forklifts and flatbed carts.
Nails can generally be divided into
L Gas nail
Oil felt nail
Cement nail
Round nail
L line card nail
Floor nail
Air nails are used for connecting wood to wood, wood to walls, and in the furniture industry.
Oil felt nails are used to fix oil felt and other objects. (To prevent leakage at the nail cap, oil felt gaskets are usually installed.)
Cement nails are used for cement walls and have rust prevention function.
Round nails are used for wood products and are widely used in industries such as agriculture, construction, and furniture production.
Line clips are used to secure objects such as wires and telephone lines.
Floor studs are used to fix wooden floors, with common sizes of 1.5 inches, 2 inches, and 2.5 inches.
Screws can generally be divided into
Wood screws
Self tapping screws
Expansion screw
The connection and fastening of wooden screws and wooden products are widely used in home decoration and are ideal products for artificial boards and plastic parts. They have sharp cutting edges, good product hardness, and are easy to screw in. A section without screws makes it difficult to exit after being screwed in
Self tapping screws are suitable for both metal and wood types, and are often used to connect thinner steel plates and non-ferrous metal plates. When connecting, use screws to directly tap out the threads.
Hinges can be divided into door and door frame covering methods
Interior style
Half covered type
Fully covered
Mainly used for cabinet doors, furniture cabinet doors, furniture folding edges, and other places.
After closing the cabinet door in a concealed manner, the entire door frame (i.e. the full width of the exposed door frame) can be seen at the connection between the door and the door frame.
After half closing the cabinet door, only half of the door frame can be seen at the connection between the door and the door frame (i.e. only half of the width of the door frame is exposed).
Full cover type, also known as straight arm type, after closing the cabinet door, the door frame cannot be seen at the connection between the door and the door frame (i.e. the door frame is completely covered by the door).
Handle can generally be divided into
Door handle
L small door handle
The door handle is generally made of stainless steel, copper, zinc alloy, stone, etc., and is often used on the doors of hotels, restaurants, shopping malls, and other places.
Small door handles are generally made of materials such as stainless steel, copper, zinc alloy, plastic, ceramic, wood, etc., and are often used on doors such as cabinets, drawers, wardrobes, etc. The commonly used wooden furniture handle hole spacing is 32mm, 64mm, 96mm, 128mm, and 192mm.
hinge
1) Function: When installing doors (excluding glass doors), hinges are required to connect the door leaf to the door frame. hinges are the connecting parts between the door and the door frame, and sometimes hinges are also required for installing windows.
2) Material: Mainly includes copper hinges and stainless steel hinges.
3) Specification: The joint specification description is:
X* XXX
Bearing diameter, length, width, and thickness
4) Purchase precautions: Door hinges are generally selected based on the size of the door and the main quantity. The front door adopts a 4-inch (length) joint surface,
Kitchen doors, wall kitchens, and desk doors should be equipped with 2-2.5 inch hinges.
Hinges: (commonly known as pipe hinges, door hinges)
1) Function: Various cabinet doors (small cabinet doors, such as wardrobes, kitchen cabinets, and combination low cabinets), and connecting components with cabinet bodies. 2) Specifications: There are generally three types of hinge specifications: metal (straight curved), half cover (Zhongheng), and inner side (Daheng), with a typical hinge opening angle of 110 degrees. There is also a special angle of 180. 45 inside. Out of 90. The above applies to wooden doors. The installation of glass cabinet doors requires dedicated glass door hinges. The opening diameter is generally two types: 530mm and 35mm. 3) Purchase item: According to the purchase requirements, there are regular installation hinges and quick installation hinges. And two-dimensional and three-dimensional adjustable hinges that can adjust the size of the door gap (the so-called three-dimensional refers to the adjustable position of the door leaf relative to the cabinet).
door stopper
1) Function: The door stopper acts between the door leaf and the wall or cabinet, avoiding damage caused by collision between the door body and the wall when opening the door. And due to its magnetic attraction, it can fix the position of the door and avoid accidental closing due to wind or other effects.
2) Material: There are mainly two types: copper and alloy.
3) Specification: Door suction can be divided into wall suction and floor suction depending on its installation position. Wall suction (base installed on the wall, metal suction installed on the door corresponding to the base position). Ground suction (base installed on the floor, metal suction installed on the door).
4) Purchase item: Choose wall suction and floor suction visible wall surfaces, floor materials, and their decoration environment to determine. If you do not want to damage the ground material, you can use wall suction. Conversely, if you do not want to damage the wall surface or the length of the wall suction to be insufficient due to drilling, you can choose floor suction.
door closer
1) Function: A device used to control the automatic rebound and closure of doors after opening. Installed between the top of the door and the door frame. Door closers are generally only suitable for one-way doors
2) Specifications: The door closer specifications range from NO.1 to NO.5 according to the size and weight of the door it is suitable for. The applicable description of its model and door is as follows: (Taking GMT door closer as an example):
In addition, the closing speed of the door closer can be determined by adjusting the speed control screw on one end of its connecting seat. The adjustment method is slow in the clockwise direction and fast in the counterclockwise direction.
3) Purchase item: It should be pointed out that the door closer can be divided into 90 degree positionable and 90 degree non positionable according to the principle of no principle. The 90 degree adjustable finger door can automatically fix its position without rebounding after opening 90 degrees. If it is necessary to close the door, external force must be applied. If there is no positioning at 90 degrees, this function is not available. Customers can choose according to their needs.